Kuvaus
Autologic AssistPlus akku
Suosittelemme kokeilemaan seuraavan toimenpiteen ennen uuden akun vaihtamista:
Deep Discharged Battery Recovery Procedure
1. Insert the external power supply into the DC jack, press the power button and allow the unit to boot to the O/S.
2. Press the power button to shutdown the O/S.
3. Once shutdown leave the unit for approx 10 minutes with the external power supply still fitted and powered.
4. After 10 minutes, remove and reinsert the power supply from the DC jack repeatedly and observe the front panel LED.
5. If the LED briefly goes green then leave power supply in the DC jack. If the LED goes red after a short period then the battery is out of the deep discharge and is beginning to charge again. Keep the power connected to allow the battery to charge. The unit may be booted up and used at this time too if required.
Lähetämme akunvaihto-ohjeen tilauksen mukana.
Arviot
Tuotearvioita ei vielä ole.